This is a simple fire alarm circuit, which can help the user's color interested against fire accidents based on a LDR and lamp pairs an alarm for sensing the fire.The works by sensing the smoke Produced During fire.The circuit produces an audible alarm the fire breaks Pls out with smoke.
When a number of smoke passes Between a bulb and an LDR, the amount of light falling on the LDR decreases. This Causes the resistance of the LDR to Increase and the voltage at the base of the transistor is pulled high due to Which the supply to the COB (chip-on-board) is completed. Different cobs are available in the market to generate Different Musical. The choice of the COB depends on the user. The signal generated by COB is amplified by an audio amplifier. In this circuit, the audio power amplifier is wired around TDA2002. The sensitivity of the circuit depends on the distance Between bulb and LDR as well as the setting of preset VR1. Thus by placing the bulb and the LDR at appropriate distances, one May Vary preset VR1 to get optimum sensitivity. An ON / OFF switch is suggested to turn the circuit on and off as Desirable.
ads
ads
Review
Labels
- Circuit (13)
- Electric Generator (8)
- Electrical parts (66)
- Electricity (4)
- Electromagnetic (1)
- Elektronics (13)
- Enginer Electric (2)
- Impressions (1)
- Installation (2)
- Repair (4)
Popular
-
well .... This country white elephant is very common in sex so do not be surprised if you're watching tv or Thailand fitting 8:00 3:0...
-
This audio peak limiter employs a FET as a variable resistance to attenuate the input signal according to a control voltage (CV). It offers ...
-
Generation environment because it uses water as the primary energy. Water energy source with a certain height is used to drive a turbine co...
-
You want to try to install a satellite dish, whether for satellite TV reception and for the purposes of Grabbing the Internet, it does not ...
-
This circuit serves for connecting the stereo outputs from Four Different channels as inputs and only one of Them is selected to the output ...
No comments:
Post a Comment